material: high mod carbon fiber
coating: two-component, 3 layer system, by hand in Europe
bearings: sealed double row, max and high-load needle bearings
assembly: full quality control and frame assembly in house by Instinctiv
rear travel: 140 mm
rear brake: 180 mm post mount.
Included in the frameset:
– down tube and chainstay protectors
– Acros Blocklock headset (ZS44, ZW56)
– Instinctiv 30t narrow wide chainring
– seatpost clamp (31.6 mm)
– through axle DT Swiss RWS 148×12 with detachable lever
Remark: shock is not included in the frameset.
3.17 kg, including cable clamps, headset bearings, seat post clamp and protectors.
Pinion C1.12 gearbox set
12 gears, 600% range, 166 mm Q factor
– including 170 mm cranks
– including Pinion 26T rear sprocket
– including Pinion universal spacer set
– including Pinion DS2 grip shifter
– optional chain tensioner
– optional Instinctiv trigger shifter
optional aluminum 29″ Crankbrothers Synthesis Enduro alloy rims, Industry Nine 101 hub, 28 spokes. 110×15 BOOST, ISO 6 bolt, black
optional carbon 29″ Industry Nine Hydra Enduro Carbon, 110×15 BOOST, ISO 6 bolt, black
optional aluminum 27.5″ Crankbrothers Synthesis Enduro Alloy rim, Industry Nine 1/1 hub, 32 spokes, 148×12 BOOST, ISO 6 bolt, black
optional carbon 27.5″ Industry Nine Hydra Enduro Carbon, 148×12 BOOST, ISO 6 bolt, black
through axle: DT Swiss RWS 148×12 (X12), with detachable lever, HWQASM00S2035S
We recommend a maximum rider weight of 100 kg, including clothing, backpack, accessories.
In some cases we might need to assemble another version of a component or a similar component, when the component in question is not available anymore in the foreseeable future.
All sizes are given in millimeters, unless stated otherwise.
* with a saddle stack of 40mm, a dropper post of 125 mm for size medium and a dropper post of 150 mm for sizes large and extra large.
All our bikes have a anti-squat value of around 115% at sag across all gears thanks to our chainline not being affected by gear shifts.
Anti-squat values come down throughout the bikes’ travel: from more than 120% down to less than 90%. This way our team crafted a very efficient yet lively suspension platform.
Our gearbox driven bikes benefits from very little pedal kickback. Especially at high speed, in heavier gears kickback is negligible.
This is a major benefit because it means the suspension remains fully active and sensitive during quick descends, even when pedaling.
Anti-rise levels are optimal at 90 to 100% throughout the bikes’ suspension travel.
This means that brake forces accurately compensate for any mass transfer during deceleration. Not only at sag-point but at any point throughout the bikes’ travel.
Our suspension platform is designed to offer a near vertical initial axle-path. A vertical or rearward axle path improves the suspension’s smoothness.
When the vectors from trail obstacles and the wheel path are more in line this results in the suspension being compressed rather than the bike being ‘held back’.
Stand straight with your back against a wall and place a book on your head. Make sure the book is parallel with the floor and at right angles to the wall, touching the wall. Make a mark on the wall with tape and measure the distance between the bottom of the book and the floor.
Stand straight up with your back against a wall. Take a book and tuck it between your legs. Pull up the book, simulating the pressure of sitting on a bike saddle. Make a mark on the wall with tape and measure the distance between the top of the book and the ground.
Various shocks can be used in combination with the M platform. Shock specifications and stroke are similar for all M7, M9 and M97 models.
The following combinations have been validated:
Float X 185 x 55 mm Trunnion
Float DPX2 185 x 55 mm Trunnion
Float DPS 185 x 55 mm Trunnion
Super Deluxe 185 x 55 mm Trunnion
R535 ONE 185 x 55 Trunnion
Topaz T3 Air 185 x 55 Trunnion
Float X2 185 x 55 mm Trunnion,
Remote versions of the Float DPX2 and Float X
Deluxe 185 x 55 mm Trunnion
Remote versions of the Deluxe and Super Deluxe
TTX1Air or TTX2Air, 185 x 55 mm Trunnion
Fast, precise and very close to what you are used to. Allows intuitive single upshift and double downshifts.
Tuned front and rear alloy wheel system for enduro riding and racing, with Industry Nine 101 front and rear hub.
Colors may appear different on your screen. Not all selection options are reflected and updated in the image representing the bike.
The mentioned delivery times are estimated to the best of our knowledge, based on the lead times that are communicated to us by our suppliers. The expected shipping date might change if parts are delivered to us later than expected. Depending on the chosen options, the lead time can become longer.
Approx weight based on the lightest configuration in size L, with a Pinion C1.12 drive train, carbon wheelset, without pedals.
Many Instinctiv riders are part of our growing community. They are happy to share real stories about their bikes to potential new Instinctiv riders without any commercial pressure. We hope you want to be part of our community as well. So we can add your phone and email on our website or send your contact details to potential new Instinctiv riders in your area when they ask to see a bike in real.
We are happy to help you find the best option to see and ride this bike. Let us know your location and we will be back to you in a day.
Are you interested in high-end mountain bikes? Sign up to hear the first about new bikes we develop, demo bikes we get in stock and special actions. Don’t worry, we will not spam you.