We can offer a limited number of bikes with a price that is a little more friendly. If you fill out the form, we will check if there is still one available for you.
We can offer a limited number of bikes with a price that is a little more friendly. If you fill out the form, we will check if there is still one available for you.
3.471 €
order today, get your frame in 4 - 5 weeks*
| color | eastern blue glossy, pistachio green glossy, forest grey glossy, sunlight yellow glossy, midnight dark glossy, rocky white matte, espresso dark matte, vulcano black matte |
|---|---|
| size | MD, LG, XL |
material: high mod carbon fiber
coating: two-component, 3 layer system, by hand in Europe
bearings: sealed double row, max and high-load needle bearings
assembly: full quality control and frame assembly in house by Instinctiv
rear travel: 150 mm
rear brake: 180 mm post mount.
Included in the frameset:
– down tube and chainstay protectors
– Acros Blocklock headset (ZS44, ZW56)
– Instinctiv 30t narrow wide chainring
– seatpost clamp (31.6 mm)
– through axle DT Swiss RWS 148×12 with detachable lever
Remark: shock is not included in the frameset.
3.32 kg, including cable clamps, headset bearings, seat post clamp and protectors.
Pinion C1.12 gearbox
12 gears, 600% range, 166 mm Q factor
– including Instinctiv 30T chainring
– including Pinion chain tensioner
– including Pinion DS2 grip shifter
– including T30 or T26 rear sprocket
– optional Instinctiv trigger shifter
– optional Instinctiv belt drive
optional aluminum 29″ Crankbrothers Synthesis Enduro alloy rims, Industry Nine 101 hub, 28 spokes. 110×15 BOOST, ISO 6 bolt, black
optional carbon 29″ Industry Nine Hydra Enduro Carbon, 110×15 BOOST, ISO 6 bolt, black
optional aluminum 29″ Crankbrothers Synthesis Enduro Alloy rim, Industry Nine 1/1 hub, 32 spokes, 148×12 BOOST, ISO 6 bolt, black
optional carbon 29″ Industry Nine Hydra Enduro Carbon, 148×12 BOOST, ISO 6 bolt, black
through axle: DT Swiss RWS 148×12 (X12), with detachable lever, HWQASM00S2035S
120kg / 264lb
This maximum weight limit includes the rider weight plus gear and luggage (helmet, clothing, backpack, luggage carrier, etc.). Make sure to adhere to your suspension manufacturer’s recommended weight limits, as they may have lower weight limits.
All sizes are given in millimeters, unless stated otherwise.
* with a saddle stack of 40mm, a dropper post of 125 mm for size medium and a dropper post of 150 mm for sizes large and extra large.
Stand straight with your back against a wall and place a book on your head. Make sure the book is parallel with the floor and at right angles to the wall, touching the wall. Make a mark on the wall with tape and measure the distance between the bottom of the book and the floor.
Stand straight up with your back against a wall. Take a book and tuck it between your legs. Pull up the book, simulating the pressure of sitting on a bike saddle. Make a mark on the wall with tape and measure the distance between the top of the book and the ground.
Various coil and air shocks can be used in combination with the Kodiak G 150. The following combinations have been validated:
Float DHX 185 x 55 Trunnion
Float X 185 x 55 mm Trunnion
Float DPX2 185 x 55 mm Trunnion
Float DPS 185 x 55 mm Trunnion
Arma V3 185 x 55 mm Trunnion
Storia Lok V3 185 x 55 mm Trunnion (lok lever needs to be turned upside down by EXT)
Super Deluxe Select+ 185 x 55 mm Trunnion
R535 ONE 185 x 55 Trunnion
Topaz T3 Air 185 x 55 Trunnion
TTX2Air, 185 x 55 mm Trunnion
Float X2 185 x 55 mm Trunnion,
Remote versions of the Float DPX2 and Float X
Deluxe 185 x 55 mm TR versions
Super Deluxe Ultimate 185 x 55 mm TR versions
Remote versions of the Deluxe and Super Deluxe
We advise to use the spring calculation from Fox to understand which spring rate you would need.
In the spring calculator you will need to fill out some personal preferences and some Kodiak G 150 frame specific values. Please use the following:
Rear travel (Federweg hinten): 150 mm
Shock travel (Hub des Dämpfers): 55 mm
Load on rear end (Belastung auf den Hinterbau): 65%
Light, efficient and ergonomically very good. Developed with Ergon. Great for shifting up and down multiple gears at once.
Fast, precise and very close to what you are used to. Allows intuitive single upshift and double downshifts.
Tuned front and rear alloy wheel system for enduro riding and racing, with Industry Nine 101 front and rear hub.
The Hydra S Carbon series pairs the legendary performance of the flagship Hydra hub with the S Series chassis and modern carbon technology.
Colors may appear different on your screen. Not all selection options are reflected and updated in the image representing the bike.
The mentioned delivery times are based on the idea that your order now, pay within 2 - 3 days and that shipping will take about a week. The estimated delivery times are calculated to the best of our knowledge, based on the lead times that are communicated to us by our suppliers. The expected shipping date might change if parts are delivered to us later than expected. Depending on the chosen options, the lead time can become longer.
Approx weight based on the lightest configuration in size L, with a Pinion C1.12 drive train, carbon wheelset, without pedals.
