
OCELOT FRAMESET
€ 5.430,00
Configuration costs: -



If you doubt between two sizes, then consider that a larger size frame will be more stable. A larger size will put the front wheel further in front of you, which gives the feeling of security but it will require more effort to ride a manual or wheelie.
If you have longer legs and a shorter torso than the average person your height, then you are better of choosing the smaller of the recommended sizes. If you have a long torso and arms, most likely you'll want to size up.

Stand straight with your back against a wall and place a book on your head. Make a mark on the wall with tape and measure the distance between the bottom of the book and the floor.

Stand straight up with your back against a wall with a book between your legs. Pull up the book, simulating the pressure of sitting on a bike saddle. Make a mark on the wall with tape and measure the distance between the top of the book and the ground.
Carbon fibre monocoque with 125mm, 135mm or 145mm of rear travel. PUMA suspension system. Internal cable routing. Rockers, links and pivot axles from AL7075. Post Mount 180 mm brake system. Max tire width: 2.6”. The frame is UDH compatible. Frames are assembled in-house. Coating is a two-component, 3 layer system, applied by hand in Europe.
Enduro sealed double row ball bearings and sealed max ball bearings. Bearings are pressed and checked in-house.
DT Swiss RWS 148×12 (X12), with detachable lever, HWQASM00S2035S
Comes with a 32T e*thirteen SRAM direct mount or comparable chainring. The maximum chainring size is 34T and the minimum 30T.
e*Thirteen Helix Core Alloy or comparable cranks, 165 mm.
The frame set comes with Acros head set bearings.
A Fox Transfer 180mm dropper post will sink completely into the seat tube of a size LG frame.
Maxon AIR S bikedrive. Max torque of 90Nm, max power output of 620W with 85% efficiency. Motor weight: 2kg
Build-in 400Wh battery. An external range extender of 250Wh can be attached onto the frame.
Maxon controller integrated in the top tube, minimalist switch on the handle bar to change drive modes and a Maxon App to change technical setttings.
The frame itself is approximately 3.1 kg, a complete frame set with motor, battery, controller, cables, rear axle, sensors and head tube bearing is round 7.5 kg.
Depending on components, wheels and tires the weight of a full bike will range from 16.8 kg - 19.3 kg in size LG.
120kg is the maximum rider weight limit, which includes the gear and luggage (helmet, clothing, backpack, etc.)
Riding in medium or boost support mode you can manage around 1.100 - 1.400 meters of elevation gain on a full battery. Obviously elevation gain depends greatly on riding style, terrain and rider weight.
Lifelong warranty on the frame for the original buyer. The general terms and conditions apply.
24 months of warranty, covering defects in materials and workmanship. It does not cover damage resulting from improper use, such as overload, incorrect voltage, or unauthorized repairs.

All sizes are given in millimeters, unless stated otherwise.

All sizes are given in millimeters, unless stated otherwise.

All sizes are given in millimeters, unless stated otherwise.
We have given the Ocelot a progressive character. How progressive a bike is depends primarily on the regression of the leverage ratio combined with the progressiveness of the air shock.
The leverage ratio decreases during the travel. This way the suspension is supple and sensitive around sag, yet big hit capable. Plush with little risk of bottoming out.
The PUMA suspension on the Ocelot gives an anti squat value that is more or less the same in all gears. At sag the Ocelot has an anti-squat value of 115% in the granny gear and 108% in the most heavy gear. This compensates for 100% of pedal bob induced by the pedal torque and some extra to account for your body movement on the bike.
Anti-squat values come down throughout the bikes’ travel to create less pedal pop deeper in the travel. In normal language this means that the platform is efficient in all gears during a climb or sprint, yet very lively when going downhill.
The Ocelot benefits from little pedal kickback. Especially at high speed, in heavier gears kickback is negligible.
This means the suspension remains fully active and sensitive during quick descends, even when pedaling.
When you brake, the center of gravity shifts forward causing the fork to compress and the rear suspension to extend or compress, depending on the anti-rise value.
The Ocelot has anti-rise levels between 84 - 99% throughout the bikes’ suspension travel. In effect this stops you and the bike from tilting forward under hard braking. At the same time levels around 100% allow the suspension to remain active and sensitive throughout your braking zone.
The Ocelot has a near vertical axle-path during the first half of the travel. This is the part of the suspension travel that you use most during very fast sections.
When the vectors from trail obstacles and the wheel path are more in line this results in the suspension being compressed rather than the bike being ‘held back’. You will feel this as smoothness of the suspension.
















€ 5.430,00
Configuration costs: -